JETTA 680

Fully synthetic oil provides extremely wide temperature and oxidation stability, ensuring greatly extended servicing intervals
Low friction coefficient provides excellent lubrication and reduces wear
High degree of demulsification provides greater lubrication efficiency
Provides excellent seal compatibility and thermal stability
Low foaming reduces residue, varnish and scum build-up, so reducing maintenance costs
Provides very high rust protection
Completely water resistant
Compatible with seal and gasket materials normally used in hydraulic and compressor systems

Properties	Method	Unit	32	46	68	100	150
Appearance	Visual	---	Bright & Clear	Bright & Clear	Bright & Clear	Bright & Clear	Bright & Clear
Density at 29.5 °C	ASTM D-4052	g/ml	0.819	0.821	0.826	0.846	0.846
Viscosity at 40 °C	ASTM D-445	mm²/sec	31.39	44	65.95	102	150
Viscosity at 100 °C	ASTM D-445	mm²/sec	6.13	7.5	10.81	14.6	145
Viscosity index	ASTM D-2270	-	147	136	155	147	147
Flash point, COC	ASTM D-92	°C	244	249	248	240	257
TAN	ASTM D-974	mg KOH/g	0.360	0.340	0.310	0.310	0.300
Pour point	ASTM D-97	°C	<-60	<-60	<-60	-60	-55
Air release at 50 °C	DIN 51381	min	1	2	5	9	14
Emulsion characteristics at 54 °C	ASTM D-1401		40-40-0 (10 min)	40-40-0 (10 min)	40-40-0 (15 min)	40-40-0 (5 min)	40-40-0 (5 min)
Copper corrosion, 3 h at 100 °C	ASTM D-130		la	la	la	la	la
Foam test, Seq. I / II / III	ASTM D-892		Nil	Nil	Nil	Nil	Nil

Scroll the table sideways to see every grade.

Grades	32 · 46 · 68 · 100 · 150
Base fluid	Polyalphaolefin (PAO), ashless
Viscosity at 40 °C (ASTM D-445)	31.39 – 150 mm²/sec
Viscosity index (ASTM D-2270)	136 – 155
Flash point, COC (ASTM D-92)	240 – 257 °C
Pour point (ASTM D-97)	<-60 to -55 °C
Air release at 50 °C (DIN 51381)	1 – 14 min
Foam test, Seq. I / II / III (ASTM D-892)	Nil

Need help with this product?